Smartfog In Duct Cold Mist Humidification System
$9,985.00
Description
American Made SmartFog TS100-1 Duct Mounted Evaporative Cool Fog Atomizer Humidifier
The TS100-1 duct mounted atomizer and adiabatic air moisturizer system also offers the optional ZeroTDS water filtration system, removing over 99.9% of minerals from the water, resulting in pure humidity and moisture being added to the room. This can be especially important for commercial printing rooms and other industrial manufacturing applications where mineral dust cannot be allowed to settle on products. The TS100-1 indoor humidifier also has the ability to integrate with MODBUS and BacNET computer controller systems, if needed. Contact us for a custom quote at 800-701-2513 if this is needed so we can perfectly design the humidifier system to your specific needs and application details.
- In Duct Humidification System
- Smart Fog® systems use 50-70% less energy to generate humidity than other technologies.
- No wetting
- Maintenance free, no moving parts
- Modular system fits to any application and size.
- Conserve Energy and Water
- Safe! Low operating pressure
- Eliminate mold, bacteria, viruses and insects
- Complete dust suppression (any size partials)
- High Quality workmanship, MADE IN THE USA
- NO wet spots, Guaranteed
- Great for: Cold storage, printing applications, disinfection fogging, cooling operations and MORE!
Features:
- In Duct Humidification System
- Ultra Small 4.2 micron droplet size with Smart Fog® equal air spacing technology
- Generate and maintain any level of required humidity from 1% to 99% without wetting, depending on HVAC airflow, duct sizing and other parameters
- Non-clogging orifice
- Low Pressure Operation
- Smart Fog® Double Cooling technology (Evaporative Cooling and Cold Fog
- Fast and simple plug and play installation
- Precise Relative Humidity Control (±1%) from 1% to 100% in any condition
- 4 functions in on system: Humidity control, fumigation / sanitation, cooling and dust / static suppression
- 1 Year Warranty
- Type: In Duct Humidication system
- Droplet Size: 4.2 Microns
- Power:
- Capacity: 0 – 1.5 GPH
- Dimensions:
- Weight:
- Compressed Air Requirements: 2 CFM at 100 – 150 PSI
- Water Pressure: 1 – 100 PSI
- CLICK HERE FOR BROCHURE
- CLICK HERE FOR SPEC SHEET
- CLICK HERE FOR ZeroTDS FILTRATION SYSTEM
This System Includes:
- 01.1 1 • TS100-1 – In-Duct Industrial Humidifier
- 01.2 1 • PB1 – Control Center ( 1 Zone )
- 01.3 1 • VB – Vacuum Box
- 01.4 1 • CPLC2 – Intelligent Controller ( 2 Zone )
- 01.5 1 • S2E – Relative Humidity Sensor E Series (±2%)
- 01.6 1 • S2ED – Relative Humidity In-Duct Sensor V Series (±2%)
- 01.7 1 • SAFS – Air Flow Sensor (In-Duct)
- 01.8 1 • AF900 – Air Filter Set 900 L/min [31 cfm]
- 01.9 1 • PFK – Pipe and Fittings Kit
Optional Items:
- Chemical Injector – Fully automated precise injection of any water dissolving material. No priming required. User-friendly interface allows digital input of the desired ratio. (contact for info 800-701-2513)
- ZeroTDS Water Filtration System – Four stage filter which removes all minerals from the water, providing pure DI water
- Air Compressor – Recommended Screw or Piston Compressor – Required air flow rate: 3 CFM (72 LPM ) @ 110 psi (7 Bar)
- 120-240VAC electrical supply at CPLC Controller
- Water supply, at minimum pressure of 45 psi (3 Bar) Max flow rate: 2 GPH (6 LPH)
- Control Wires for the Sensors and the PB (this is simple 18 gauge electrical wire you can usually buy at Home Depot, etc)
Additional information
| Weight | 29.48350405 kg |
|---|



Reviews
There are no reviews yet.